[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Linrad] Re: Map65-IQ not receiving data from Linrad
- Subject: [Linrad] Re: Map65-IQ not receiving data from Linrad
- From: w7ami <cableone.net; w7ami@xxxxxxxxxxxxxxxx>
- Date: Mon, 2 Mar 2009 16:47:40 -0800 (PST)
Good catch. I added the return after the ip address and it works.
Thanks for pointing that out.
After I got everything up and running I noticed that after 5 to 10
minutes Linrad would freeze. Changing the "Output delay margin (ms)
from 1000 to 100 cured this. Linrad has been running on my PC for 24
hours now with out a glitch.
On Mar 2, 6:47 pm, "Gabriel - EA6VQ" <ea6v...@xxxxxxxxx> wrote:
> >>One odd thing it that even though I put 127.0.0.1 into par_netsend_ip
> >>Linrad reports the ip address as 127.0.0.1.00???
> I had the same problem and I found that apparently linrad requires the line
> in the par_netsend_ip file to be followed by a carriage return.
> After adding that CR linrad reports the right address 127.0.0.1 and it not
> longer shows errors sending the data.
> However MAP65-IQ is still reporting "No RX data".
> Back to make more tests....
> 73. Gabriel - EA6VQ
> Web-Site: HTTP://www.vhfdx.net<HTTP://www.vhfdx.net>
> VQLog 3.1 (build 53): HTTP://www.vqlog.com<HTTP://www.vqlog.com>
> Real-Time Propagation maps: HTTP://www.vhfdx.net/spots/map.php
> > -----Mensaje original-----
> > De: linrad@xxxxxxxxxxxxxxxx [mailto:linrad@xxxxxxxxxxxxxxxx]En nombre de
> > w7ami
> > Enviado el: domingo, 01 de marzo de 2009 22:09
> > Para: Linrad
> > Asunto: [Linrad] Map65-IQ not receiving data from Linrad
> > Help. I'm trying to get a new setup of Map65-IQ to work with
> > Linrad. I have set up Linrad according to the quick start setting on
> > Joe's page. I added the par_netsend_ip file with 127.0.0.1 as the
> > only text. I set the base report to 50020 and turned off all sends and
> > receives except for item #8 which is ON (port50024). I hit "T" in
> > the main menu and Linrad reports that it is in the Netsend and SDR-IQ
> > modes. I installed Map65-IQ ran it and nothing! It never sees the
> > data from Linrad. If I try to do anything with Map65-IQ the process
> > will crash and then I get a Net Send error in Linrad.
> > The computer is an Asus P5K-E with a dual core Intel processor running
> > Win XP with SP3. Linrad is up and running and I can see and hear my
> > echos there. Localhost is running and I can ping it.
> > One odd thing it that even though I put 127.0.0.1 into par_netsend_ip
> > Linrad reports the ip address as 127.0.0.1.00???
> > I also tried it with Vista64 on the same PC with the same results.
> > Terry W7AMI
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en