[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [linrad] More SuSE 8.2 Help
- Subject: Re: [linrad] More SuSE 8.2 Help
- From: "Arie Dogterom" <pa0ez@xxxxxxxxxxxxx
- Date: Sun, 3 Aug 2003 09:12:49 +0200
try to experiment first with the programme krecord( it is in suse 8.2). That
has a recording level indicator and helps you in setting the mixer controls.
If you are able to record and replay a sound with krecord than linrad should
work ok.(Switch off krecord before starting linrad)
I have no knowledge about the screen problems.
----- Original Message -----
From: Terry <terry@xxxxxxxxxxxxx>
Sent: Sunday, August 03, 2003 3:42 AM
Subject: [linrad] More SuSE 8.2 Help
> With Arie's help I have svgalib installed. The RPM he provided
> great. I had to go in and change some settings in libvga.config but I
> have the screen working... sort of. The image is very very dim and there
> is no color. I am using an ATI Expert 128 card with a Rage 128 chip and
> Phillips 150S LCD monitor. Any ideas any one? Has any one else even
> seen this?
> I am trying to use the built in AV97 sound since I can't use my old
> soundblaster card any more. New motherboards don't have ISA slots any
> more. I can hear sound in the headphones but don't see it on the display
> and changing the settings don't effect the audio levels. It is obvious
> that the sound is not going through the linrad processor. Any ideas on
> what I'm doing wrong here?
> Terry KJ7F