[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [linrad] RE:New Linrad e-mail list user

Hello Ramiro,

> I have installed the following Linrad versions:
> 00-35
> 00-56
> 01-03
> and I can not make any of them work properly in the 486. When I press left
> mouse button on the waterfall graph to listen to the signal, the 
> sound works
> some seconds, then stops and come back later, and so on.... I do not know
> what happened cause I got it working two years ago. I get delay 
> times longer
> than 20 seconds. In the past I get shorter delay times and better computer
> response (now it is too slow). I think I need to study Linrad manual in
> order to understand it better and weak the parameters properly. I do not
> remember what parameters I used, perhaps you keep our old 
> e-mails? I deleted them. :-)
Yes, I keep old E-mails to some extent and I found a report from
you specifying the following par_userint file:
vga mode [11]
font scale [1]
mouse speed [64]
input mode [0]
rx channels [1]
ad channels [1]
ad speed [6000]
ad device no [32]
ad device mode [0]
ad frag [8]
da device no [33]
min da speed [5000]
max da speed [44100]
max da channels [2]
max da bytes [2]
min da channels [1]
min da bytes [1]
check [2220024]

These were the par_wcw parameters:
First FFT bandwidth (Hz) [15]
First FFT window (power of sin) [1]
First forward FFT version [3]
First FFT storage time (s) [4]
First FFT amplitude [1000]
Enable second FFT [0]
First backward FFT version [0]
First backward FFT att. N [5]
Second FFT bandwidth factor in powers of 2 [2]
Second FFT window (power of sin) [0]
Second forward FFT version [0]
Second forward FFT att. N [7]
Second FFT storage time (s) [5]
Enable AFC [0]
AFC averaging time (s) [5]
AFC delay (%) [25]
AFC min S/N (dB) [6]
AFC lock range Hz [150]
AFC max drift Hz/minute [100]
First mixer bandwidth reduction in powers of 2 [4]
First mixer no of channels [1]
Baseband storage time (s) [200]
Output delay margin (0.1sek) [5]
Output sampling speed (Hz) [6000]
Default output mode [0]
A/D speed [6000]
Check [1110024]

The parameter file changes a little from version to version
but I think the above sholud make it easy to restore the
performance you had Sept 14 2001, at least with 00-35.
In case more recent versions run slower or behave incorrectly
on your 486 I would be very interested to know.


Leif / SM5BSZ