[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: Map65 reports "No Rx data"

Hi Jeff

If you have 60dB noise on MAP65 means you are sending the data not in 16
bit, I think in 32 bit and MAP65 need to receive the data in 16 bit format,
you need to change one parameter, First Backward FFT Version from "0"
(default) to "1".

You will see how now the noise level down to some dB's negative or positive,
I ask Joe how important is to keep in 0 dB and he said is not important.

Try and publish your results, I'm preparing a guide with two scenarios, both
programs in same computer and in separate computer.

Best regards


-----Original Message-----
From: linrad@xxxxxxxxxxxxxxxx [http://groups.google.com/group/linrad?hl=en