[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: Map65 reports "No Rx data"

Joe, etal:

Currently, I am just following the discussion but have not yet 
installed Linux.  I have Linrad for windows operating and MAP25, but 
wish to use them both on the same computer using input from the 
SDR-IQ.  Is localhost pertinent to Linux or is it available running 
win-XP?  Last I heard MAP25 was not yet set up for use with the 
SDR-IQ (something about the sample rate).  I am using a duoCore-2 
2.33 GHz Dell with 2GB memory.

I can run with my soundcard with output from the FT-847 but that 
offers no advantage over JT65 as it is limited to 2500-KHz bw.

73 Ed - KL7UW

At 06:48 AM 8/16/2008, you wrote:

>Hi Jeff, Leif, and all,
>Just in case it is not clear: Leif's response was directed
>to users who wish to run Linrad and MAP65 on the same
>computer.  (IP address is the code used for
>"localhost", i.e., the computer on which the program is
>running.)  You can also set the address field to a specific
>IP address, for example:
>    char netsend_rx_multi_group[]={""};
>to send Linrad data to MAP65 running on a machine at that IP
>         -- 73, Joe, K1JT
>Leif Asbrink wrote:
> > Hi Jeff,
> >
> > I did not see anyone answering this:
> >
> >
> >>Does it make any difference how the linrad ffts get configured? Does
> >>linrad configuration affect the format of multicast packets? Does Map65
> >>care what format Linrad uses for multicast packets?
> >
> >
> > You have to set "first backward FFT version" to 1 in order to
> > select the 16 bit format for the second time function.
> > In case you select 0 the format would be 32 bit floating point
> > and that is not what MAP65 looks for.
> >
> > To get unicast just change
> > char netsend_rx_multi_group[]={""};
> > (near line 80 in network.c) to this:
> > char netsend_rx_multi_group[]={""};
> >
> > Then re-compile (make linrad or make xlinrad)
> >
> > In case it is more convenient to use MAP65 under Windows,
> > use make linrad.exe under Ubuntu or download mingw32 and nasm
> > so you can compile Linrad under Windows.
> >
> > 73
> >
> > Leif / SM5BSZ

You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en