[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Reversed tuning?


I'm trying out linrad with a softrock 80 board, and on comparing the signals between it and a Kenwood receiver, I find that the direction of tuning is reversed, so that signals above the crystal frequency appear below on the linrad display, and vice-versa.  There is undoubtedly  a simple reason for this, I wonder is anyone can suggest it?

I have checked the correct connection to tip and ring of the audio cable.  The sound card is a soundblaster 24bit usb at 96KHz sample rate, and generally things appear to be working very well, there is good image rejection - it's just in reverse!

Thanks for any assistance,

Andrew Lees.
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en