[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: Reversed tuning?

Hi Alex,

That appears to correctly select upper or lower sideband for ssb reception, but doesn't seem to affect the macro tuning behaviour.  This is what I would expect from the help - I understand that the red lines define the offset from the tuning frequency of a "digital oscillator" used for demodulating ssb and cw signals.



On Tue, 2009-10-06 at 05:33 -0700, Alex wrote:
You have to set vertial red lines to another side.

On 6 окт, 15:06, Andrew Lees <andrewl...@xxxxxxxxx> wrote:
> Hi,
> I'm trying out linrad with a softrock 80 board, and on comparing the
> signals between it and a Kenwood receiver, I find that the direction of
> tuning is reversed, so that signals above the crystal frequency appear
> below on the linrad display, and vice-versa.  There is undoubtedly  a
> simple reason for this, I wonder is anyone can suggest it?
> I have checked the correct connection to tip and ring of the audio
> cable.  The sound card is a soundblaster 24bit usb at 96KHz sample rate,
> and generally things appear to be working very well, there is good image
> rejection - it's just in reverse!
> Thanks for any assistance,
> Andrew Lees.

You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en