[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: RX overrun error

Hello Joe,

I have to apology for not fully correct information in my previous e-mail. When I started to try MAP65-IQ I used my old laptop, AMD Turion, 512 MB RAM and XP. MAP65-IQ works well, no problem. Then I tried MAP65 and I have problem I described earlier. I notice that 512 MB RAM is not sufficient for MAP65 and I tried my new notebook with Intel Dual 2 Core, 4 GB and Vista. I started again with MAP65-IQ and it looks fine so I went to MAP65. I tried today again MAP65-IQ on this notebook and there is problem with MAP65-IQ as well. MAP65-IQ receives data from Linrad with no problem, Drop 0.00%, but the very first decode somehow freeze the main window, the clock stops and no other decode. I can open for example options etc. It only stops clock, Moon and Sun data and no more decode lines in In the configuration window are the following messages:

MAP65-IQ Version 0.9 r1116, by K1JT
Revision date: 2009-04-10 09:28:35 -0400 (Fri, 10 Apr 2009)
Run date:   Thu Aug 27 21:06:14 2009 UTC
Using Linrad for input, PortAudio for output.
Will accept unicast data from Linrad.

Audio    Output    Device Name
Device  Channels
   4       2       Microsoft Sound Mapper - Output
   5       2       Speakers (Conexant High Definit
   6       2       SPDIF Interface (Conexant High
   7       2       Line 1 (Virtual Audio Cable)
   8       2       Line 2 (Virtual Audio Cable)

Default Output:  4
Requested Output:  8
Opening device 8 for output.
Audio output stream running normally.
Exception in Tkinter callback
Traceback (most recent call last):
  File "C:\k1jt\svn\wsjt\map65iq\buildmap65\out1.pyz/Tkinter", line 1345, in __c
  File "C:\k1jt\svn\wsjt\map65iq\buildmap65\out1.pyz/Tkinter", line 456, in call
  File "<string>", line 1178, in update
  File "C:\k1jt\svn\wsjt\map65iq\buildmap65\out1.pyz/Tkinter", line 1139, in con
  File "C:\k1jt\svn\wsjt\map65iq\buildmap65\out1.pyz/Tkinter", line 1130, in _co
TclError: invalid command name ".38032848.38033008.38033168"

Waterfall continues and every minutes show new lines, clock on waterfall windows shows correct time.

I checked it again on old AMD Turion notebook and MAP65-IQ still works well. All description of problems with MAP65 were correct.

vy 73 Jan

On Thu, Aug 27, 2009 at 4:46 PM, Jan Karel <Hello Joe and others,

I am sorry for bandwidth, but I am starting to be desperate.

I changed the fft to MMX (16 bits) and I can set the RX level from about -14 to +18 dB by volume control of a sound card. Unfortunately the problem persists. Red No Rx data is irregularly flashing in about 1 second interval. Meantime there is no dropped packets. It realy looks like network problem. I also tried single PC configuration - local loop, but it looks very similar. Windows reports CPU load bellow 30 % when both Linrad and MAP65 is running on the same configuration.

Is there a big difference in LAN load (I/O requests) between MAP65-IQ and MAP65? I am asking because MAP65-IQ works fine with default par files. Can you send me your par files to get some ideas if I haven't mess anything in Linrad?

Will it help if I send you the file and messages that windows show when program crashed? It reports APPCRASH event in the module Audio.pyd

73 Jan

You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en