[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: Linrad MAP-65 & Perseus

Hi Alberto,

Alberto E. Zagni wrote:
> Hi Leif and Joe,
> now that Perseus is working fine with Linrad, how far are we from 
> having MAP-65 and Perseus working togheter like SDR-IQ?
> All the best
> Alberto I2KBD / AB3IF

I know very little about the internal details of the 
Perseus, and I do not have one on which to experiment. 
MAP65 requires input samples at 96000 Hz: two signal 
channels, each with I and Q, so four data streams in all. 
Perseus is a single-channel receiver, so it certainly cannot 
provide this information

MAP65-IQ requires one channel, I and Q: two data streams, 
each sampled at 66,666,667/700 = 95238.1 Hz.  Maybe Perseus 
can be configured to do this, I do not know.

Neither MAP65 nor MAP65-IQ "talks" directly to any receiver 
hardware.  Instead, they get their Rx input from Linrad, 
taking advantage of Linrad's excellent waterfall displays, 
noise blanker, etc., etc.

	-- 73, Joe, K1JT

You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en