[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Linrad] Linrad-03.00
- Subject: Re: [Linrad] Linrad-03.00
- From: w3sz <comcast.net; w3sz@xxxxxxxxxxxxxxxx>
- Date: Mon, 19 Jan 2009 18:51:25 -0500
Linrad 03-00 fails for me when it attempts to begin the process of
setting parameters for par_wcw immediately after I type 'a'. This is
the same as Stan's error. As Ermanno indicated, changing DUMPFILE to
TRUE allows Linrad to pass this hurdle and run OK.
I have what is for me a more perturbing problem.
I have been using an Infrasonic Quartet soundcard quite happily with
PowerSDR and Linrad-02.16, at 192k sampling rate.
When I attempted today to update Linrad, I found that for all the new
versions I have available to test [02.34 through 02.58, as well as
03.00], there is a problem with Linrad. Although the card setup in
Linrad goes with no problems in any version of Linrad through 03.00,
for versions 02.34 and beyond, there is signal only for the center 46
kHz of the 192 kHz display.
I put pix showing normal function of Linrad 02.16 and PowerSDR-IF
Stage 0.92 with the Quartet at:
I put pix of the malfunctioning Linrad versions 02.34, 02.39, 02.58,
and 03.00 display screens at
I did have the latest downloaded windows driver versions for the
Quartet when I discovered this, and I also went back sequentially for
3 versions to see if that made a difference. It did not.
I am running Windows XP 32 bit version, with SP3 on a 3.2 GHz Pentium
4 that has been a good workhorse for several years.
Any help would be appreciated. In the meantime, I will keep running
Linrad 02.16 ;)
Quoting Leif Asbrink <leif@xxxxxxxxxx>:
The new version has many enough changes in it to motivate
a change in the major version number.
This message was sent using IMP, the Internet Messaging Program.