[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
- Subject: [Linrad] Linrad-03.00
- From: Leif Asbrink <sm5bsz.com; leif@xxxxxxxxxxxxxxxx>
- Date: Mon, 19 Jan 2009 12:58:21 -0400
The new version has many enough changes in it to motivate
a change in the major version number.
The baseband filter is now controlled by moving a "handle"
(a yellow line) so you can easily set bandwidths that are wider
than the currently shown graph.
Default parameters are different. They have advanced
features turned off and the idea is that the newcomer
should find a "common receiver" if he selects the defaults
(Except for hardware parameters. The user must decide what
sampling rate to use. Linrad can not guess whether he
has connected the soundcard to the output of an SSB transceiver
or whether he has hardware capable of delivering 192 kHz
bandwidth to the soundcard.)
Please test the defaults on your hardware for the processing
modes that you use. Then tell me whether something needs
to be changed to get a reasonable result with the defaults.
Probably you will find new bugs, I have no hardware here
in the Caribbean sunshine so everything is based on what
I have on the hard disk...
The changes from 02-58 to 03-00 are focussed on short
processing delay without loss of (dynamic range) performance.
There are a couple of links at the bottom of the development
page from where you can download Linrad-03.00
Leif / SM5BSZ
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en