[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[linrad] Internal Error 1040 with linrad and SuSE 7.3


when starting the hardware test mode under linrad 4.7, there were two device
drivers listed:
under dev/dsp and dev/dsp0.
after selecting one of them and then selectiong the read or read and write
mode and then selecting the normal rx-mode or other modes i get always an
error code:

INTERNAL ERROR: 1040 (errno 22)
routine:set_analog_io    file setad.c
call to ioctl failed. (SNDCTL_DSP_SPEED)

I am using an soundblaster ISA PnP AWE 64 and ALSA with SuSE 7.3.

Thanks in advance for any information!

ernst, dl2lac