[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [linrad] Mirroring of Waterfall - problem solved thank you

This was the frequency I wanted!  Now I should be able to feed this into my
external routine which will move the rig  frequency to a new setpoint.  If I
do that correctly then the station I had clicked on should show up at my
rigs bfo frequency of 800 Hz.
> You may use the frequency found in mix1_selfreq[0]. This is the
> frequency you actually clicked at and it is available even if the
> AFC is disabled.

Thank you very much for your patience.

73... Sigurd