[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [linrad] Intel 82801E Display Adapter
- Subject: Re: [linrad] Intel 82801E Display Adapter
- From: "Sigurd Kimpel" <sigurd@xxxxxxxxxxxxxxxxx
- Date: Sat, 22 Nov 2003 12:12:21 -0500
Thanks for the help. It turned out that /etc/X11R6/XF86Config had the
mouse protocol as IMPS/2, and /etc/vga/svga.conf had the protocol as PS/2.
Now the mouse works just fine and I can begin to try and troubleshoot
problems getting oss to work with the Intel AC-97 Audio Controller.
----- Original Message -----
From: "John Harrison, NI1B" <jmh6@xxxxxxxxxx>
Sent: Monday, November 22, 1999 7:21 AM
Subject: Re: [linrad] Intel 82801E Display Adapter
> Hi Sigurd,
> It may in fact be a mouse protocol mismatch between the "type" on both
> ends of the link. What I mean is that "Microsoft" protocol is MUCH
> different than the other common protocol. If the receiving end doesn't
> match the sending end the mouse will appear to jump around unpredictably.
> Cure - Some very old mice had switches rather than the current
> "automatic" protocol detection now used. Try a variety of mice. You will
> probably find one combination that "just works". From there you and
> Also check the /etc/vga/libvga.conf file and change its settings to
> match the mouse your X windows system is using. Explanation - not all mice
> can/will switch protocols once they are initialized, so your vga mouse
> parameters "should" match your Xwindows /etc/X11R6/XF86Config parameters.
> Some distributions don't properly keep the mouse types the same in both
> Good luck.
> john, ni1b
> On Fri, 21 Nov 2003, Sigurd Kimpel wrote:
> > Ayone have any good experience with an Intel 82801 Display Adapter? I
> > have Linrad running on my desktop computer which has an AGP card, but
> > not been able to get the svga libraries to run (mouse is uncontrollable,
> > otherwise display is ok) with an HP e-pc. I operate as a rover and
> > my desktop with me is awkward at best :-)
> > 73.... Sigurd Kimpel KJ1K/Rover