[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Re:[linrad] Getting started
- Subject: Re: Re:[linrad] Getting started
- From: Richard Bown <richard.bown@xxxxxxxxxxxxxxxxxxxx
- Date: 16 Oct 2003 14:55:13 +0100
Thanks for the reply Sergio, I was wondering if this was one of those
lists, that stayed very quiet.
This behaviour is very strange.
This is an AMD 1.2 GHz Duron processor.
I noticed from the archives that at least 1 person is running with MDK
9.1, shortly to try on MDK 9.2, still downloading the new release.
Some observations I made :-
the was no rules to "make install" so the binary stayed in the directory
it was built, so there 's no path to it.
I also tried running it from outside of X , and it still turns off the
output from the graphics card.
and why is it complaining of my linux core being uncompatable from
/porc/cpuinfo ???
whats wrong with this ?
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 7
model name : AMD Duron(tm)
stepping : 1
cpu MHz : 1200.095
cache size : 64 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge
mca cmov
pat pse36 mmx fxsr sse syscall mmxext 3dnowext 3dnow
bogomips : 2392.06
At least if I run in a console it will respond to ctrl C
It all goes nuts after on setup you enter the mouse speed.
I real confused with this
For anyone who can make sense of a trace on start up, see below:-
[richard@xxxxx linrad-01.07]$ strace linrad
execve("/home/richard/linrad-01.07/linrad", ["linrad"], [/* 55 vars */])
= 0
uname({sys="Linux", node="gb7tf.org.uk", ...}) = 0
brk(0) = 0x80bed20
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0
x40013000
open("/etc/ld.so.preload", O_RDONLY) = -1 ENOENT (No such file or
directory)
open("/etc/ld.so.cache", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=67644, ...}) = 0
old_mmap(NULL, 67644, PROT_READ, MAP_PRIVATE, 3, 0) = 0x40014000
close(3) = 0
open("/usr/lib/libvgagl.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0 +\0\000"...,
1024) = 10
24
fstat64(3, {st_mode=S_IFREG|0755, st_size=65240, ...}) = 0
old_mmap(NULL, 68352, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
0x40025000
mprotect(0x40034000, 6912, PROT_NONE) = 0
old_mmap(0x40034000, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED,
3, 0xe00
0) = 0x40034000
close(3) = 0
open("/usr/lib/libvga.so.1", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\200\210"...,
1024) = 10
24
fstat64(3, {st_mode=S_IFREG|0755, st_size=342156, ...}) = 0
old_mmap(NULL, 365980, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
0x40036000
mprotect(0x40085000, 42396, PROT_NONE) = 0
old_mmap(0x40085000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED,
3, 0x4e
000) = 0x40085000
old_mmap(0x4008b000, 17820, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANON
YMOUS, -1, 0) = 0x4008b000
close(3) = 0
open("/lib/i686/libm.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\2404\0"...,
1024) = 102
4
fstat64(3, {st_mode=S_IFREG|0755, st_size=136052, ...}) = 0
old_mmap(NULL, 138624, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
0x40090000
mprotect(0x400b1000, 3456, PROT_NONE) = 0
old_mmap(0x400b1000, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED,
3, 0x200
00) = 0x400b1000
close(3) = 0
open("/lib/i686/libc.so.6", O_RDONLY) = 3
read(3, "\177ELF\1\1\1\0\0\0\0\0\0\0\0\0\3\0\3\0\1\0\0\0\260X\1"...,
1024) = 102
4
fstat64(3, {st_mode=S_IFREG|0755, st_size=1246468, ...}) = 0
old_mmap(NULL, 1256516, PROT_READ|PROT_EXEC, MAP_PRIVATE, 3, 0) =
0x400b2000
mprotect(0x401df000, 23620, PROT_NONE) = 0
old_mmap(0x401df000, 16384, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED,
3, 0x12
c000) = 0x401df000
old_mmap(0x401e3000, 7236, PROT_READ|PROT_WRITE,
MAP_PRIVATE|MAP_FIXED|MAP_ANONY
MOUS, -1, 0) = 0x401e3000
close(3) = 0
old_mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS,
-1, 0) = 0
x401e5000
mprotect(0x40036000, 323584, PROT_READ|PROT_WRITE) = 0
mprotect(0x40036000, 323584, PROT_READ|PROT_EXEC) = 0
munmap(0x40014000, 67644) = 0
fcntl64(0, F_GETFD) = 0
fcntl64(1, F_GETFD) = 0
fcntl64(2, F_GETFD) = 0
stat64("/proc/bus/pci", {st_mode=S_IFDIR|0555, st_size=0, ...}) = 0
brk(0) = 0x80bed20
brk(0x80bfd20) = 0x80bfd20
brk(0) = 0x80bfd20
brk(0x80c0000) = 0x80c0000
open("/etc/vga/libvga.config", O_RDONLY) = 3
fstat64(3, {st_mode=S_IFREG|0644, st_size=16284, ...}) = 0
fstat64(3, {st_mode=S_IFREG|0644, st_size=16284, ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x40
014000
read(3, "# Configuration file for svgalib"..., 12288) = 12288
read(3, "order to use them:\n# 1280x720, 1"..., 4096) = 3996
close(3) = 0
munmap(0x40014000, 4096) = 0
open("/home/richard/.svgalibrc", O_RDONLY) = -1 ENOENT (No such file or
director
y)
ioperm(0x3b4, 0x2c, 0x1) = -1 EPERM (Operation not
permitted)
fstat64(1, {st_mode=S_IFCHR|0600, st_rdev=makedev(136, 1), ...}) = 0
mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1,
0) = 0x40
014000
write(1, "svgalib: Cannot get I/O permissi"..., 37svgalib: Cannot get
I/O permis
sions.
) = 37
munmap(0x40014000, 4096) = 0
exit_group(1) = ?
[richard@xxxxx linrad-01.07]$
HTH
Richard
On Thu, 2003-10-16 at 13:11, ik2mmb@xxxxxxxxx wrote:
> This does not answer your fact, just to divulgate and report another crashing system.
>
> Cheers,
>
> Sergio IK2MMB
>
> > Hi
> >
> > trying to get linrad to run, albeit with difficulty
> >
> > OS Mandrake 9.1, kernel 2.4.21.-25mdk WM =gnome
> > processor amd 1.2 GHz duron 500MB ram
> >
> > installed svgalib-1.4.3mdk and svgalib-devel-1.4.3,
> > both of the libs are no longer distributed since MDK 8.1.
> >
> > compiled linrad eventually and started from the command line
> > X gets killed
> > message
> > /proc/cpuinfo says linuxcore is not compatable
> > svgalib reports mouse is type 5
> > I select 800x 600 and font 1
> >
> > screen goes totally blank, and monitor is turned off
> > ctrl + alt +f1 shows active console.
> >
> > alt+f7 to return to X just a small block saying 80x40 on the xterm
> > and a message linrad start on tty8
> > ctrl + alt f8 agin blank and no drive to the monitor
> > alt + f12 ( my syslog is echoed here) to see wghat s happened
> >
> > not good cant change between consoles, keyboard locked out.
> > so hit the reset button on the PC, this I dont like doing
> >
> > Nothing was recorded in syslog
> >
> > I would prefer to run a native linux prog for this.
> > sitting windows app on either win4lin or vmware really screws up any dsp
> > function
> >
> > 73 mvh
> > Richard G8JVM
> > --
> > Richard Bown <richard.bown@xxxxxxxxxxxxxxxx>
> >
> >
--
Richard Bown <richard.bown@xxxxxxxxxxxxxxxx>
LINRADDARNIL