[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

R: [Linrad] Linrad-02.53

Hi Leif.

I found that with the new version of gcc ships with the Ubuntu 8.10 
xlinrad not compile with the following error:

gcc version 4.3.2 (Ubuntu 4.3.2-
root@xxxx:~# cd /usr
root@xxxx:/usr# cd linrad-02.53
/usr/linrad-02.53# make xlinrad
gcc xmain.c -g -O -DOSNUM=1 -W -Wimplicit -
Wreturn-type -Wformat -m32 -Wunused -Wcomment -Wchar-subscripts -Wshadow -
Wuninitialized -Wparentheses -Wstrict-prototypes -Werror -ffast-math -fomit-
frame-pointer -c -o xmain.ol
cc1: warnings being treated as errors
xmain.c: In 
function âui_setupâ:
xmain.c:597: error: ignoring return value of âfgetsâ, 
declared with attribute warn_unused_result
make: *** [xmain.ol] Error 1

installed the old version GCC-3.4 and all working fine.

73 Ermanno / ik7ezn

>----Messaggio originale----
>Da: leif@xxxxxxxxxx
>Data: 07/11/2008 15.29
>Ogg: [Linrad] Linrad-02.53

>Hi All,
>Download from the bottom of:
>The network setup 
allows a file to set the IP address
>for MAP65 users. 
>The transfer of 
calibration data to Linrad slaves is 
>Various other little bugs 
are corrected.
>                        --    o    --
>When you set unusual 
or incorrect parameters you are 
>testing aspects of the Linrad code that may 
be very hard 
>to test systematically. The response may depend on your

>hardware and the value of various other parameters.
>Contrary to older 
versions, Linrad-02.53 behaves correctly
>in case you select an output sampling 
speed of 1000Hz in SSB
>mode. Surely an operator error since 500 Hz output 
>is not really what we want in SSB mode, but an error like
should not generate a crasch due to a floating point 
>exception (divide by 
>Someone might even want to use SSB mode for WSPR or whatever
>with a 
low output rate to make the data stream fit some
>slow experimental matlab 
>In case you make "errors" that cause Linrad to behave
or even hang or crasch, please save all
>the parameter files, pack them in a 
zip or bz2 file and
>send them to me together with a problem description:-)

>  73
>Leif / SM5BSZ
>You received this message because you are subscribed to the 
Google Groups "Linrad" group.
>To post to this group, send email to 
>To unsubscribe from this group, send email to 
>For more options, visit this group at http: