[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Linrad and Tac32



Thanks for that Roger.
I should have remembered it myself :-)
Setting Linrad to "Above Normal" is enough to prevent Linrad
freezing when Tac32 is started.
Time will show whether this also solves the more occasional
freezes, but I suspect it will.

There doesn't seem to be any way to lock in the chosen priority,
without having to set it anew with Task Manager each time Linrad is
started.
Am I missing something here?

On Mar 20, 9:37 pm, Roger Rehr <w...@xxxxxxxxxxx> wrote:
> What happens when you use the Task Manager to set the priority of
> Linrad to, for example, 'Realtime'? [or 'High' or 'Above Normal'?]
>
> 73,
>
> W3SZ
> Roger Rehrhttp://www.nitehawk.com/w3sz
>
> Quoting VK2KU <vk...@xxxxxxxxxxxxxxxx>:
>
>
>
>
>
> > I am running just 3 applications on my main shack computer:
> > Linrad v2.43
> > WSJT6
> > and Tac32.
> > Computer is a 2.8GHz Celeron, single core with 1.5GB RAM, running XP.
> > Tac32 is a TAPR program for reading a GPS receiver and synchronizing
> > computer time.
>
> > I have mentioned previously to Leif that Linrad occasionally FREEZES
> > in mid operation, for no obvious reason.
> > I can now add that if Linrad is already running, it ALWAYS freezes
> > when Tac32 is started.
> > Tac32 is quite hungry for CPU share until GPS lock is achieved.
>
> > OK, you say, then always start Tac32 before Linrad, and so I do.
> > Linrad still freezes but only occasionally after an hour or two.
> > This is not really a big deal, but just very irritating.
> > I cannot positively link this occasional freezing with Tac32.
> > It is difficult to test something that only happens occasionally!
>
> > I have been using the Task Manager to monitor CPU useage,
> > Memory useage and Page Faults without learning much.
> > WSJT pulls the CPU idle capacity down to zero during decode
> > (like Tac32 starting up), but WSJT doesn't make Linrad freeze.
>
> > Thoughts and advice welcome.
>
> > Thanks,
>
> > Guy  VK2KU
>
> Roger Rehr
> W3SZhttp://www.nitehawk.com/w3sz
--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad-unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad
-~----------~----~----~----~------~----~------~--~---

LINRADDARNIL