[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: linrad-02.41 and 02-42

Hello Guy,

Thanks for the help. I have it going more quickly now. Now I see that 
the USB light on my SDR-14 flashes very rapidly when using the direct 
input on 144 mhz. On another setup, I use the 0-30 mhz input for the 28 
mhz IF of another bank of transverters. The USB light flashes very 
slowly. I think the sample rate is wrong, but I haven't mastered the 
setup with 2.41 yet.

I got along ok with 2.35, but the setup routine is different for 2.41. 
Oh well. I will get it eventually.



VK2KU wrote:
> Dave,
> It is likely that you have inadvertently changed 1st FFT Bandwidth.
> In 2.35, this parameter was set to the first allowed value BELOW your
> choice,
> in 2.41 it is set to the nearest allowed value above or below.
> The waterfall speed is also controlled by the number of waterfall
> averages
> (box bottom left of the main waterfall).
> 73  Guy
> On Jan 25, 7:29 am, Dave Sublette <k...@xxxxxxxx> wrote:
>> I got 2.41 running ok now. The waterfall runs much more slowly than it
>> did on 2.35. I would like it to run faster, but I don't know what
>> parameter controls that aspect of the program.
> > 

You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad-unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad