[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: 64 bit driver



Hi John,

>   What an interesting undertaking. 
> 
>   *What software are you using to select OS? I have only seen one but there must
>     be others in the market.  
I am using Grub. Once I know how to do it is quite simple. The problem is that
my OEM Windows install CDs silently refuse to install when there is some other
version of Windows already installed....

>   *How are you cooling the processors?  This has always been a concern for me.
>     Noisy with one processor, two might be a problem.
Oooh! I use "slow" processors. 2.33 GHz. The fans are controlled by BIOS and
run at a very low speed because the processors run at low voltage and do not 
get hot. The fans make a lot of noise when I press reset;-)
 
> Perhaps you will be able to compare 32 to 64 bit receiver performance and also 
> performance between OSs. 
Yes. Many interesting aspects become visible:-)

The system has far too many CPUs and therefore all my mistakes in
how tasks are distributed between threads become very obvious. There are
other "errors" like in X11 and Windows where the entire screen is redrawn
far too often. Pierr, ON5GN is helping on these issues and the next
version of Linrad will be insensitive to other activities on screen.
Todays version 3.06 and earlier have problems when other windows are moved
on the screen but that will be fixed:-)

> With unintended consiquences, the obvious answer 
> might not be the final answer.
I expect 64 bit systems to be generally slower than 32 bit systems.
There is no reason to use a 64 bit system for Linrad unless you want
to run a large number of instances simultaneously with a lot of
memory for each one. It seems to me that many people will use 64 bit 
systems in the near future just because they have the hardware.
Currently it is a bad idea because drive routines are not yet stable.

Another problem is latency. Good old soundcards like SB Live are not
supported in the 64 bit environment under Windows. Modern soundcards
seem to have a lot of functionality like equalizers etc. and I am afraid
they add a needless time delay from soundcard to Linrad input.

There is a two-fold transition in the Windows world right now. 
32bit > 64 bit (For SDR, it will be better to stay at 32 bit)
Win98/Win2000/WinXP > Vista/Win7 (I think we have to welcome it.)

I have always tried to avoid Microsoft so I did not know much
about the peculiarities of the systems and how boot is arranged.
Now I know a bit more:-) I have two hard disks and I can copy
both entire hard disks and boot all the systems from the copies.
That is forgiving for all the problems caused by installing all the
software that comes along with various drive routines that might
work or might not work.... Uninstall seems to only remove a small
fraction of all the stuff that installs itself.

One has to tell each Windows version to not index, backup or do
anything else to the other "drives" Each version is C: and has to
avoid messing with all other "drives."

73

Leif
 


> 
> John K1VBM
> 
> ---- Original Message ----
> 
> From: Leif Asbrink <leif@xxxxxxxxxx>
> To: perseus_SDR@xxxxxxxxxxxxxxxx "linrad@xxxxxxxxxxxxxxxxxxxxxx 
> <linrad@xxxxxxxxxxxxxxxx>
> Cc: 
> Subject: [Linrad] 64 bit driver
> Date: Sun, August 09, 2009, 14:56:00
> 
> 
> Hi All,
> 
> I am in the process of building a test system. A multi OS computer
> on which I can test problems that people may have running Linrad
> on modern systems. It is a D5400XS with two Xeon quad processors
> so there will always be idle CPU cores even if programming errors
> make one or a couple of the cores run at 100% :-)
> 
> I have these operating systems in a multi-boot configuration:
> XP 32 bit
> XP 64 bit
> Vista 32 bit
> Vista 64 bit (soon)
> Windows 7 32 bit
> Windows 7 64 bit
> Debian 32 bit
> Ubuntu 9.04 32 bit
> Ubuntu 9.04 64 bit
> Fedora 11 64 bit
> Mandriva 2009 32 bit
> 
> There are problems with drive routines under Windows. Not only
> lack of support for various soundcards, but also incomplete
> drivers for e.g. Delta 44.
> 
> I have found a 64 bit driver for Perseus on the Internet.
> It is named 64bitDriver.rar but it has a problem. When it is
> installed I get a blue screen with a stop error when I
> try to close Windows XP x64. I had problems with 64 bit Windows 7
> which would not give any error message, just freeze when I try 
> to close, but I am not sure the reason was the Perseus 64 driver.
> I just made a fresh install (Partition copy, cp /dev/sdb2 /dev/sda2
> under Linux to get back to the state several days ago...) 
> 
> It seems the Perseus 64 bit driver works properly, but it does
> not close(??) when Windows asks it to. Is there anyone who knows
> how to correct?
> 
> 73
> 
> Leif / SM5BSZ
> 
> 
> 
> 
> 
> > 

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---

LINRADDARNIL