[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Linrad 03.05b Frequent [1284] Messages

I have a condition where Linrad reports:
[1284]The RX input device has failed... Press Any key

I attached the par files.

I start Linrad, select "C" and click the arrows at the top of the
display, either right or left in various combinations.  After a few
clicks, I get message 1284.

sudo gdb ./xlinrad 
(gdb) r
The program being debugged has been started already.
Start it from the beginning? (y or n) y

Starting program: /home/tomdean/Radio/linrad-03.05b/xlinrad 
[Thread debugging using libthread_db enabled]
[New Thread 0xb7c858d0 (LWP 10590)]
[New Thread 0xb799bb90 (LWP 10591)]
[New Thread 0xb719ab90 (LWP 10592)]
[New Thread 0xb6999b90 (LWP 10593)]
[New Thread 0xb6198b90 (LWP 10594)]
[New Thread 0xb2766b90 (LWP 10595)]
[New Thread 0xb1f65b90 (LWP 10596)]
[New Thread 0xb1764b90 (LWP 10597)]
[New Thread 0xb0f63b90 (LWP 10598)]
[New Thread 0xb0762b90 (LWP 10599)]
[New Thread 0xaff61b90 (LWP 10600)]
[New Thread 0xaf760b90 (LWP 10601)]
[Thread 0xaf760b90 (LWP 10601) exited]
[Thread 0xaff61b90 (LWP 10600) exited]
[Thread 0xb799bb90 (LWP 10591) exited]
[Thread 0xb2766b90 (LWP 10595) exited]
[Thread 0xb0f63b90 (LWP 10598) exited]
[Thread 0xb1764b90 (LWP 10597) exited]
[Thread 0xb1f65b90 (LWP 10596) exited]
[Thread 0xb0762b90 (LWP 10599) exited]
[Thread 0xb6198b90 (LWP 10594) exited]
[Thread 0xb6999b90 (LWP 10593) exited]
[Thread 0xb719ab90 (LWP 10592) exited]

Program exited with code 04.

If I press F1 in the top left arrow box, I get message [7].  Clicking
the mouse in this screen causes a segment violation.

sudo gdb ./xlinrad 
GNU gdb 6.8-debian
Copyright (C) 2008 Free Software Foundation, Inc.
License GPLv3+: GNU GPL version 3 or later
This is free software: you are free to change and redistribute it.
There is NO WARRANTY, to the extent permitted by law.  Type "show
and "show warranty" for details.
This GDB was configured as "i486-linux-gnu"...
(gdb) r
Starting program: /home/tomdean/Radio/linrad-03.05b/xlinrad 
[Thread debugging using libthread_db enabled]
[New Thread 0xb7c5b8d0 (LWP 10573)]
[New Thread 0xb7971b90 (LWP 10577)]
[New Thread 0xb7170b90 (LWP 10578)]
[New Thread 0xb696fb90 (LWP 10579)]
[New Thread 0xb616eb90 (LWP 10580)]
[New Thread 0xb28adb90 (LWP 10581)]
[New Thread 0xb20acb90 (LWP 10582)]
[New Thread 0xb18abb90 (LWP 10583)]
[New Thread 0xb10aab90 (LWP 10584)]
[New Thread 0xb08a9b90 (LWP 10585)]
[New Thread 0xb00a8b90 (LWP 10586)]
[New Thread 0xaf8a7b90 (LWP 10587)]
[Thread 0xaf8a7b90 (LWP 10587) exited]
[Thread 0xb00a8b90 (LWP 10586) exited]
[Thread 0xb28adb90 (LWP 10581) exited]
[Thread 0xb08a9b90 (LWP 10585) exited]
[Thread 0xb10aab90 (LWP 10584) exited]
[Thread 0xb20acb90 (LWP 10582) exited]

Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0xb18abb90 (LWP 10583)]
0x080bd130 in clear_baseb () at wcw.c:152
152	for(i=0; i<k; i++)fft3_slowsum[i]=0;
(gdb) bt
#0  0x080bd130 in clear_baseb () at wcw.c:152
#1  0x080bd793 in narrowband_dsp () at wcw.c:1261
#2  0x08096503 in thread_narrowband_dsp () at lxsys.c:510
#3  0xb7e154ff in start_thread ()
from /lib/tls/i686/cmov/libpthread.so.0
#4  0xb7d6949e in clone () from /lib/tls/i686/cmov/libc.so.6

You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en

Attachment: par.tar.bz2
Description: application/bzip-compressed-tar