[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: Linrad 3-02 Crash

Hi Leif,

I don't know if it is related but, shortly after Linrad 3-02 came out I noticed when exiting the program running Perseus,  if you didn't exit by the "esc" key and you did use the "X" box in the upper right the program hangs up. I have to go in task manager to clear Linrad. Selecting "Realtime" and exiting (in error) by ticking the "X" box caused the computer to lock. This meant I needed to drive to the remote site (8 hours each way) and reboot the computer.... I am careful not to do this. I am in Florida for the winter and this is now 20 hours each way...


I did report this but I missed any comments from any other users.

-----Original Message-----
From: Leif Asbrink <leif@xxxxxxxxxx>
To: linrad@xxxxxxxxxxxxxxxxxxxx Sent: Tue, 3 Mar 2009 2:43 am
Subject: [Linrad] Re: Linrad 3-02 Crash

Hi Guy,

> I installed Linrad v3-02 yesterday while testing MAP65-IQ.
> I had some serious crashes while I was trying to adjust the S-meter
> scale,
> to the point that I had to delete the relevant par file to get Linrad
> to run at all.
> Do you know about this?
No. This bug is unknown to me.

> I have not had time to try to reproduce the crash,
> being bogged down with other more important things!
> But if it is new I will try to reproduce it on Thursday/Friday.
I hope you will be sucessful in this:-)
One thing, the par file itself that does not allow Linrad to run.

Another thing, how to produce it.

There are at least two bugs here.....


Leif / SM5BSZ

You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en