[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: PSU?

Hi Jeremy,

For the +/-15V I use standard 12 V transformers connected 
to the three-phase 400/230V system that is standard here.
With a PI filter, capacitor, inductor, capacitor I have a
hum-free (this is not critical) somewhat unstable DC source
at about 15V. I run two WSE systems from it. One for Rx and 
another (modified) for Tx. Efficiency is very high, all the
heat is generated in the WSE units which are not picky about 
supply voltage:-)


Leif / SM5BSZ

You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en