[linrad] MAP65

[Roger Rehr <comcast.net; w3sz@xxxxxxxxxxxxxxxx>]

Hi, Joe et al,

I finally got to steal a couple of hours away from family/work to try 
Linrad and Map65 today.

Unfortunately, the moon was not up :(

I had previously tried MAP65 0.7 r474 with the supplied demo file and 
all worked well.

Using Joe's excellent instructions Linrad-02.34 and MAP65 connected and 
started playing together nicely immediately.

As the moon isn't up, I can't tell about decoding, but I can say that 
the waterfall is appearing properly on the MAP65 computer and all 
appears well.

The computers are both P4s, one is 3.2 GHz and the other is 3.4 GHz.  
My Core2 Duo is busy with other tasks.  Both are running Windows XP; 
Pro for the Linrad machine and Home Version for the MAP65 machine.

The network is a 100 MB/s net that is NOT dedicated to just the two 
computers and which is shared locally by 4 computers all of which are 
powered on, and which is connected by a WAP to 3-9 other computers [I 
don't know how many of the 3-9 are on; at least 3 are on for sure] and 
thence to the Internet.

With this setup using the WSE hardware and of course dual polarity 
receive, MAP65 says that it is losing on successive 1 minute intervals 
only 1.03% 0.87% 0.02% 0.00% 0.02% 0.02% 0.32% 0.34% 0.00% 0.01% 0.04% 
0.23% 0.13% 0.32% 0.02% 0.57% 0.19% of packets.  I did no optimization. 
 I of course use only switches and no hubs.

More later.

I have family activities tonight but if I can get away from them while 
the moon is up and it is not too late I will see what else I have to 
report.

73,

W3SZ
Roger Rehr
http://www.nitehawk.com/w3sz




Roger Rehr
W3SZ
http://www.nitehawk.com/w3sz


#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>


LINRADDARNIL