[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [linrad] Help: Sound under SuSE 9.1
I would look at the information about a Linrad configuration that works
with Suse9.1, alsadrivers, and two different soundcards, as described in the
'Linrad User Data Bank (ON5GN).
From there, one possible way to solve your problem could consist in
1. Use two different soundcards , one for input and one for output.
2. Find out the exact syntax of the amixer commands that are applicable to
your soundcards and replace the commands that were used for the PC128 and
Delta44 sound cards.
----- Original Message -----
From: "Daniel Koch" <dl3iae@xxxxxx>
Sent: Thursday, January 20, 2005 12:15 PM
Subject: [linrad] Help: Sound under SuSE 9.1
Hey, was that too trivial for all the specialists out there?
Just got one response by DL4MEA who has the same problem (and cannot
So please again, can anyone help me to get the sound running the way it
should under SuSE 9.1?
Tnx Daniel, DL3IAE
* To: linrad@xxxxxxxxxxxxxxxxxxxxx
* Subject: [linrad] Help Linrad sound
* From: "Daniel Koch" <dl3iae@xxxxxx>
* Date: Sat, 15 Jan 2005 00:29:55 +0100 (MET)
* Reply-to: linrad@xxxxxxxxxxxxxxxxxxxxxx
* Sender: owner-linrad@xxxxxxxxxxxxxxxxxxxxxx
after several failures I managed to get Linrad sort of running.
CPU:: P II
CPU Speed:: 233 MHz MMX
RAM in MB:: 192
SOUND CARD:: C-Media CMI 8738 5.1 PCI
SOUND DRIVER:: ALSA as in the SuSE 9.1 package
VIDEO CARD:: no clue, but it is working OK
VIDEO DRIVER:: SuSE
LINUX DISTRIBUTION:: SuSE
LINUX VERSION:: 9.1 PRO
KERNEL VERSION:: 2.6
SVGALIB VERSION:: svgalib-1.9.18 (latest)
LINRAD VERSION:: 01-27 (latest)
However, I cannot get the sound working properly. I see the spectrum but I
cannot hear the Linrad sound output on my speakers. What I hear is the
that comes in via Line IN.
If I mute this input, all sound is gone. Right mouse click on the spectrum
results in complete silence...
- "Disable direct connection from to input to output"
Sounds easy, but I don't know how. Have tried about 5 different mixers
came with my SuSE package, but the result is always the same.
I have invested countless hours and I have not much of a hint what I am
doing wrong here.
Went through all the mail index on the reflector.
I am a newbie to Linux and guess I just need somebody to tell me the
Tnx in advance
GMX im TV ... Die Gedanken sind frei ... Schon gesehen?
Jetzt Spot online ansehen: http://www.gmx.net/de/go/tv-spot