[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [linrad] Delta44 board
Hi Leif and others.
Tnx. Yes I understand the phase aspect in music!
Leif Asbrink wrote:
> Hi Rein and Kohjin,
> > Thanks and OK about "word" I imagine that if the sampling is
> > not accurate this will
> > introduce distortion in music. Whether this is really a problem
> > I do not know.
> For Linrad there is no reason to use synchronization
> of the sampling clock.
> In music it is extremely important to synchronize boards to each
> other if several boards are used for input simultaneously.
> Otherwise the phase relation between different channels will vary
> slowly with time.
> Linrad uses a single board for input and all channels on a Delta44
> board are already properly synchronized. There may be other boards
> which do not keep good synchronizm and such boards are useless
> for direct conversion (I/Q) mode.
> Synchronizing the Delta44 sampling clock at 64*96kHz = 6.144 MHz
> to an external frequency reference could be done by injecting
> a stable signal at 24.576 MHz into X1, the 24.576 MHz X-tal.
> This will be useful only if all other oscillators are GPS stabilized
> and if you want a sub Hz absolute accuracy. Already a really bad
> X-tal with 100 ppm accuracy will not cause more than 1Hz frequency
> error if the audio tone is 10kHz.
> Leif / SM5BSZ