Re: [linrad] audio channels

["Arie Dogterom" <pa0ez@xxxxxxxxx>]

Hallo Edson,

Thank you for confirming my expectations. Interesting is how good the
channel separation must be. Bus as Leif anyhow corrects the amplitude and
phase shif errors, he probably als compensates for crosstalk.
73
Arie

----- Original Message -----
From: Edson Pereira <edson@xxxxxxxxxxxxx>
To: <linrad@xxxxxxxxxxxxxxxxxxxxxx>
Sent: Friday, May 23, 2003 5:05 PM
Subject: Re: [linrad] audio channels


>
> Hi Arie,
>
> You can connect the soundcard left and right line input to the IQ
> downcoverter outputs. If you use two soundcards, you will have problems in
> synchronizing the ADCs (unless you use the same clock source for both
> soundcards). Just be sure to adjust the signal levels to meet the range of
> your soundcard.
>
> 73,
>
> -- Edson, 7n4ncl
>
> On Fri, 23 May 2003, Arie Dogterom wrote:
>
> > Hello,
> > My question probably has been answered in some of the texts, but I a
still
> > unsure :
> >
> > Having the mixers with the I an Q outputs, where shall those go : Does
one
> > need two soundcards or is it possible to use the left and right channels
of
> > a stereo card?
> > 73
> > Arie
> >
> >
>

LINRADDARNIL