[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [linrad] linrad parameter files



Brian 

the paramater files are 
par_xxx_xx
par_xx_xx
par_xxx
par_xx
esion_par
esion_par_xx
par_userint
par_network

if you have calibrated mode 'xxx' you will have
dsp_xxx_corr
dsp_xxx_iqcorr

The windows may well overlap when you start;  they do here with some choices of
screen resolution.  But if you cannot make them move by pulling on the edges with the
mouse and holding down the left button, then something is wrong.

parameter files are if i recall correctly not generated for a mode until you first
use it. the general parameters are of course generated when you start linrad.

-roger rehr
w3sz


----- Original Message Follows -----
> Briefly I have linrad installed on a PIII-800 with an AWE32 soundcard for 
> input and a PCI128 card for output.  Redhat 7.3 and oss drivers.  Phil N1KI 
> has been good enough to help by sending me his parameter files which helped a 
> bit but I still have the problem that the windows are on top of each other 
> and cannot really be moved with the mouse. (I am not sure if this should 
> normally be necessary.)
> Before going into much more detail, are the parameter files in  parssb.tar on 
> the website still relevant and if so how do I actually use them? I cannot 
> find any files dsp... in my linrad directory.
> 
> Brian.


73,
Roger Rehr
W3SZ
FN20ah
http://www.qsl.net/w3sz

LINRADDARNIL