RE: [linrad] Linrad00-47 and WSE RX2500

["Dan Hammill" <kb5my@xxxxxxxxxxxx>]

After you're satisfied with the boxed production hardware,
will you consider selling unassembled PCB kits for those
who like to do their own packaging (and also shave off some
of that production labor cost - HI)?

TNX & 73,
Dan  KB5MY


> -----Original Message-----
> From: owner-linrad@xxxxxxxxxxxxxxx
> [mailto:owner-linrad@xxxxxxxxxxxxxxx]On Behalf Of Leif Åsbrink
> Sent: Wednesday, September 25, 2002 15:21
> To: Linrad
> Subject: [linrad] Linrad00-47 and WSE RX2500
>
>
>
> Hi All,
>
> A new version is uploaded. It contains some error corrections
> that make Linrad crasch less frequently on error exits.
>
> The I/Q calibration (which I discovered did not work in Praha)
> is corrected. Previously it did not work if the fft1 transform
> size was 65536.
>
> IK3MAC reported that 00-45 and 00-46 did not work on his system
> so 00-47 has open routines for the sound device drivers that are very
> similar to those in 00-44 and older.
>
> I have 23 PCB's of WSE RX2500 here. They are all tested and have
> nearly identical performance. Some of the info about this
> hardware is updated:
> http://ham.te.hik.se/~sm5bsz/linuxdsp/optrx.htm
> http://ham.te.hik.se/~sm5bsz/linuxdsp/rxiq/opt2500.htm
> http://ham.te.hik.se/~sm5bsz/linuxdsp/rxiq/test.htm
>
> If there is a problem with the http://ham.te.hik.se server,
> mirrors can be found at:
> http://www.g7rau.co.uk/sm5bsz/linuxdsp/optrx.htm
> http://www.g7rau.co.uk/sm5bsz/linuxdsp/rxiq/opt2500.htm
> http://www.g7rau.co.uk/sm5bsz/linuxdsp/rxiq/opt2500.htm
> or at:
> http://nitehawk.com/sm5bsz/linuxdsp/optrx.htm
> http://nitehawk.com/sm5bsz/linuxdsp/rxiq/opt2500.htm
> http://nitehawk.com/sm5bsz/linuxdsp/rxiq/opt2500.htm
>
> The boards will go to Antennspecialisten next week to be
> mounted in their boxes.
>
>
> 73
>
> Leif  /  SM5BSZ
>
>
>
>



LINRADDARNIL