[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [linrad] WG: How to configure sound mixer
Perhaps there is some misunderstanding of the mixer control programs.
To mute the line input is different than to set the level to zero.
If you use gmix, there is a mute button below the level sliders on each
channel. So for linrad, the mute button and the rec button are selected
for the line in channel.
If you use kmix, you mute the channel by clicking on the green led above
the level slider, and select the recording source by clicking the red led
below the slider.
In either case, the level slider is adjusted independently of the muting.
Are there any other mixer control programs (besides ossmix) that have been
used for linrad?
Different sound cards have different capabilities, maybe in some cases the
recording source cannot be muted, or maybe the driver is not as good as it
should be and doesn't control all aspects of the mixer hardware. This is
why the database at http://www.nitehawk.com/linrad_dat/ could be useful
if more people sent in their data.
73 Matt KB0VUK