SDR data filesThe links on this page point to locations from where raw data files in .WAV format (sometimes zipped) can be downloaded. Many of these .wav files have sampling frequencies that seem faulty to ordinary .wav editors and other softwere intended for music or audio in general, but for SDR (software defined radio) any sampling speed is fine - as long as the computer is fast enough to handle it and the program is intended to handle the speed.Purpose.The purpose of the pages I have made available here is to show how various interference problems can be handled by use of Linrad. This is demonstrated with loudspeaker output recordings for conventional detectors as well as recordings of the processed output for the same sequence. They can be loudspeaker output recordings or in some cases stereo output files for head phones.The pages have screen dumps and accompanying text that describes how to use the various interference fighting tools in Linrad. They also contain the loudspeaker output from other SDR programs and relevant screen dumps to the extent others have made them available to me. All the data files are in stereo format. The two channels should be interpreted as I and Q from a direct conversion radio. Impulse noiseW3CCX/B March 05 2006 (96 kHz) by W3SZPowerline noise during the Leonides 2001 (96 kHz) by SM5BSZ Industrial switchpower QRM on medium waves. (2 MHz)by Mauno Ritola Unknown source on medium waves. (2 MHz)by Mauno Ritola ADSLADSL switched on/off. Medium waves, 1.4 Mhz. (111 kHz)by Mauno RitolaOverlapping AM stationsClose spaced AM stations with overlapping sidebands (125 kHz) by Jurgen Bartels.West Coast USA at night (500 kHz) by KE7MAV MischellaneousAwful QRM on Medium Frequencies (196 kHz) by Bengt Inge Bengtsson Non directional beacons (125 kHz) by PA0RDT Spurs and impulse noise on 20m (96 kHz) by W3SZTo SM 5 BSZ Main Page |