[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
FW: Internal Error 1040 with linrad and SuSE 7.3 (e Oct 12 2002)
- Subject: FW: Internal Error 1040 with linrad and SuSE 7.3 (e Oct 12 2002)
- From: Leif Åsbrink <leif.asbrink@xxxxxxxxxxxxxxxxxxxx
- Date: Mon, 13 Oct 2003 10:37:51 +0200
[mailto:owner-linrad@xxxxxxxxxxxxxxxxxxxxx]On Behalf Of e
Sent: Saturday, October 12, 2002 9:32 PM
Subject: [linrad] Internal Error 1040 with linrad and SuSE 7.3
when starting the hardware test mode under linrad 4.7, there were two device
under dev/dsp and dev/dsp0.
after selecting one of them and then selectiong the read or read and write
mode and then selecting the normal rx-mode or other modes i get always an
INTERNAL ERROR: 1040 (errno 22)
routine:set_analog_io file setad.c
call to ioctl failed. (SNDCTL_DSP_SPEED)
I am using an soundblaster ISA PnP AWE 64 and ALSA with SuSE 7.3.
Thanks in advance for any information!