[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [linrad] Ref More help required
- Subject: Re: [linrad] Ref More help required
- From: "John Harrison, NI1B" <jmh6@xxxxxxxxxxxxxx
- Date: Tue, 7 Oct 2003 18:39:59 -0400 (EDT)
Not sure this helps. But here goes: I bought this old Acer laptop at NH
surplus property for $50. Has sound, 1gb drive, pentium 120. So I have
been collecting floppy versions of linux. I found one that runs network
From what I have determined so far getting a recent kernel in a recent
distribution is what works.
One day linux will probably also support X windows (slower but much
more universal) and the svga problems will go away.
I too am hoping to get linrad running on a laptop. Right now I am
downloading Knoppix ( the most recent version has kernel 2.4.22 ) and am
hoping to see the audio work. But the being new the knoppix mirrors are
Once I have one version working it usually isn't too hard to figure out
what they did and copy it to whatever version I really want to use.
You may find (like I have) that older hardware is much more likely to
be turnkey than the latest cost reduced, windows only kludge some OEM came
up with to save a few dollars.
So if you can buy something older that there were a lot of that is
cheap, you will probably have better luck.
On Tue, 7 Oct 2003, W6WO wrote:
> Briefly my tale of woe is this.
> I have a Dell Inspiron Laptop 8000 with Mandrake 9.1 installed and
> working fine.
> The linrad install went well but the program does not produce a display.
> After investigation I have concluded that svgalib is not compatible
> with the video chip and folks who are involved with svgalib
> development offer no hope that this problem will be solved.
> Unless I hear from this group to the contrary it seems that if I want
> linrad (and I very much do) that I will have to buy a whole new
> computer, sound card(s) monitor and all. I would prefer a laptop but
> could go desktop and the machine would be dedicated to running linrad.
> My question is what are the preferred combination of products or
> specifications that would ensure that I don't run into the same kind
> of incompatibility again.
> For the moment let's assume an ideal and that the cost is not an
> issue (at least I can start from there HI )
> Obviously if anyone has solved this problem I would appreciate
> hearing from them soon.