[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [linrad] Mixer design - comments please
- Subject: Re: [linrad] Mixer design - comments please
- From: Alex Crow <acrow@xxxxxxxxxxxxxxxxxxxx
- Date: Tue, 8 Jul 2003 07:36:31 +0100
On Tuesday 08 July 2003 5:40 am, Edson Pereira wrote:
> Hi Alex,
> Since the input range of some soundcards can be in the range of 10 vpp, it
> may be better to use a 10V supply for the Op-Amps. You may also consider
> using the NE5532 instead of the NE5534 to lower the component costs.
I already got the 5534s for a very good price, so no worries there. I might
modify for 10V then to get that extra bit of range.
> What type of LO source are you planning in building?
> Looking at the DDS schematics presented in the SDR-1000 article, I don't
> understand why Gerald used lowpass filters and than a comparator if the
> DDS already has a square I/Q output.
The 9854 has I-Q output but they are sines (or sine and cosine), or at least a
very good approximation. It also runs off 3.3V so you need to square them up
and bring them to the drive level of the Analog Switch (5v).
> -- Edson, 7n4ncl
This message is intended only for the addressee and may contain
confidential information. Unless you are that person, you may not
disclose its contents or use it in any way and are requested to delete
the message along with any attachments and notify us immediately.
"Transact" is operated by Integrated Financial Arrangements plc
Domain House, 5-7 Singer Street, London EC2A 4BQ
Tel: (020) 7608 4949 Fax: (020) 7608 1200
Integrated Financial Arrangements plc is regulated by the FSA