[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: Linrad-02.58

Hi All,

I made a mistake in 02-58 when setting flags for the network.
As a consequence the WSE control box is not opened unless
the network is set to send e.g. raw data.

Just press 'N' on the main menu and make sure one of
the lines is yellow. Then exit and save 'W'.

The network will be sleeping unless you press 'T' or 'R',
but flags will be set properly so the WSE box will appear.


Leif / SM5BSZ

You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en