[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Linrad - windows xp
- Subject: Re: Linrad - windows xp
- From: "salvatore.militello" <unimib.it; salvatore.militello@xxxxxxxxxxxxxxxx>
- Date: Wed, 18 Jun 2008 15:57:20 +0200
i am sorry but I think to be a little
stupid. Once again a don understand
how to set the frequency to receive an
how heard this.
I send you 2 gif.
On Wed, 18 Jun 2008 02:14:47 +0200
Leif Asbrink <leif@xxxxxxxxxx>
My problem is not to link sdr-iq to
your program, but when I have ended
all setting ( someone were
misteriosus) I get the different
windows of linrad.
I dont understend before all how I
set the radio on a specific
how I can change this, ecc.
I was not able to find where this
subject is explained.
When you have arrived at the
processing screen you should see
the spectrum and the waterfall.
The first rule, read all the choices
in the main menu.
You will find: F1=Show keyboard
That should lead you forward.
If it does not help, use the "G"
command and send the GIF file to me.
All the different windows in Linrad
can be moved around and maybe
something is hidden below something
else. Not so likely, but
what happens depends on your
parameters and your screen format
so I can not tell without having
There are a couple of examples here:
A typical screen is fig 2 here:
The center frequency is set by the
little window to 7.050 MHz
and a station is selected by
clicking on it with the mouse.
Use the F1 key! (also when setting
Please start Linrad again and return
a more specific question
if the above does not help.