[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: Linrad and MAP65IQ not working

OK,  I have no idea how MAP65-IQ may work under Vista.  Not 
recommended -- by me anyway, hi.

	-- Joe

Edward Cole wrote:
> Joe,
> I guessed that might be the problem.  I will install it on my new 
> Dell P4-2.33 when I get it rebuilt, but until then I will try 
> installing it on my wife's new Laptop P4-2.0 with 3mb memory and 
> Vista.  We only use it when traveling.
> I wanted to try to have MAP-65iq running for upcoming EME 
> weekends.  Let you know how it goes.  We might upgrade the laptop to 
> Seven; do you know if this presents any problems running MAP-65iq/Linrad?
> 73, Ed
> At 09:34 AM 10/22/2009, you wrote:
>> Hi Ed,
>> MAP65-IQ uses something over 300 MB of memory.  It will run
>> on a machine with 512 MB, but will be happier on a machine
>> with 1 GB or more.
>>         -- Joe, K1JT
>> Edward Cole wrote:
>>> Joe,
>>> I finally got around to downloading MAP-65iq_r1116 as suggested,
>>> below.  But when I start up MAP-65iq the black window opens, flashes
>>> some writing for a second and closes the window (too quick to
>>> read).  The program does not launch?  I am running it on a Dell
>>> P3-866 win2000pro with 128mb memory - is that too old?  My P4-2.33
>>> has gotten a virus in windows and will have to be rebuilt, so not
>>> available right now.
>>> Ed - KL7UW
>>> At 07:05 AM 10/21/2009, you wrote:
>>>> Hi Jeff,
>>>> I'm sure that people here will be happy to help you get
>>>> MAP65-IQ running properly.
>>>> I need some additional information, to get started.
>>>>> I am able to get Linrad and Winrad working very nicely however.
>>>> Are you really using both Linrad and Winrad?  Why?  Winrad
>>>> has nothing to do with MAP65-IQ.
>>>>> The problem is that when MAP65IQ tries to decode the first sequence of
>>>>> data, the clock freezes on MAP65 and there are no decode but the MAP65
>>>>> waterfall continues to function along with the waterfalls clock. I tried
>>>>> for days trying all kinds of Linrad configurations with no luck.
>>>>> The hardware is a brand new RF Space SDR-IQ receiver and 2.7 GHz
>>>>> computer with 2 gigs of Ram.
>>>> What versions of Linrad and MAP65-IQ are you using?  I
>>>> strongly recommend that you start by installing the packaged
>>>> combination of Linrad 3.05b and MAP65-IQ r1116, available at
>>>> http://www.physics.princeton.edu/pulsar/K1JT/MAP65-IQ_r1116.EXE
>>>> Have you read and followed the steps outlined in "Quick
>>>> Start Guide for MAP65-IQ" available at
>>>> http://www.physics.princeton.edu/pulsar/K1JT/MAP65-IQ_Quick_Start.html
>>>> ?  With what success?
>>>> Run-time error messages from MAP65-IQ code appear in the
>>>> DOS-like command-prompt window (the one with black
>>>> background) that starts when MAP65-IQ is launched.  What
>>>> error messages appear there when the first decode fails?
>>>>         -- 73, Joe, K1JT
>>> 73, Ed - KL7UW, WD2XSH/45
>>> ======================================
>>>   BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
>>> 500-KHz/CW, 144-MHz EME, 1296-MHz EME
>>> DUBUS Magazine USA Rep dubususa@xxxxxxxxxxx
>>> ======================================
> 73, Ed - KL7UW, WD2XSH/45
> ======================================
>   BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
> 500-KHz/CW, 144-MHz EME, 1296-MHz EME
> DUBUS Magazine USA Rep dubususa@xxxxxxxxxxx
> ====================================== 
> > 

You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en