[Linrad] Re: Linrad and MAP65IQ not working

[Joe Taylor <Princeton.EDU; joe@xxxxxxxxxxxxxxxx>]

Hi Ed,

MAP65-IQ uses something over 300 MB of memory.  It will run 
on a machine with 512 MB, but will be happier on a machine 
with 1 GB or more.

	-- Joe, K1JT

Edward Cole wrote:
> Joe,
> 
> I finally got around to downloading MAP-65iq_r1116 as suggested, 
> below.  But when I start up MAP-65iq the black window opens, flashes 
> some writing for a second and closes the window (too quick to 
> read).  The program does not launch?  I am running it on a Dell 
> P3-866 win2000pro with 128mb memory - is that too old?  My P4-2.33 
> has gotten a virus in windows and will have to be rebuilt, so not 
> available right now.
> 
> Ed - KL7UW
> 
> At 07:05 AM 10/21/2009, you wrote:
> 
>> Hi Jeff,
>>
>> I'm sure that people here will be happy to help you get
>> MAP65-IQ running properly.
>>
>> I need some additional information, to get started.
>>
>>> I am able to get Linrad and Winrad working very nicely however.
>> Are you really using both Linrad and Winrad?  Why?  Winrad
>> has nothing to do with MAP65-IQ.
>>
>>> The problem is that when MAP65IQ tries to decode the first sequence of
>>> data, the clock freezes on MAP65 and there are no decode but the MAP65
>>> waterfall continues to function along with the waterfalls clock. I tried
>>> for days trying all kinds of Linrad configurations with no luck.
>>>
>>> The hardware is a brand new RF Space SDR-IQ receiver and 2.7 GHz
>>> computer with 2 gigs of Ram.
>> What versions of Linrad and MAP65-IQ are you using?  I
>> strongly recommend that you start by installing the packaged
>> combination of Linrad 3.05b and MAP65-IQ r1116, available at
>>
>> http://www.physics.princeton.edu/pulsar/K1JT/MAP65-IQ_r1116.EXE
>>
>> Have you read and followed the steps outlined in "Quick
>> Start Guide for MAP65-IQ" available at
>> http://www.physics.princeton.edu/pulsar/K1JT/MAP65-IQ_Quick_Start.html
>> ?  With what success?
>>
>> Run-time error messages from MAP65-IQ code appear in the
>> DOS-like command-prompt window (the one with black
>> background) that starts when MAP65-IQ is launched.  What
>> error messages appear there when the first decode fails?
>>
>>         -- 73, Joe, K1JT
>>
>>
> 73, Ed - KL7UW, WD2XSH/45
> ======================================
>   BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
> 500-KHz/CW, 144-MHz EME, 1296-MHz EME
> DUBUS Magazine USA Rep dubususa@xxxxxxxxxxx
> ====================================== 
> 
> 
> > 

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en
-~----------~----~----~----~------~----~------~--~---


LINRADDARNIL