[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Linrad] Re: Linrad 03.05b and SDR-IQ
- Subject: [Linrad] Re: Linrad 03.05b and SDR-IQ
- From: attglobal.net; radio1@xxxxxxxxxxxxxxxx>
- Date: Thu, 09 Apr 2009 17:21:32 +0000
When my waterfall was blank, I found a box in the lower right corner
with "20 db" in it I changed this to -10 db and it looks like I had expected.
---- Original Message ----
From: "Thomas D. Dean" <tomdean@xxxxxxxxxxxxx>
Subject: [Linrad] Re: Linrad 03.05b and SDR-IQ
Date: Thu, April 09, 2009, 09:21:00
On Thu, 2009-04-09 at 12:21 +0200, Leif Asbrink wrote:
> of something like 20Hz to 24kHz it is easy. I do not think you can
> use the SDR-IQ at these low frequencies. The specification is
> 10kHz and upwards. You should just use a soundcard.
The SDR-IQ is stated as useable down to 100Hz. I know about the low
> > I want to view signals from the noise
> > floor to say -50db.
> -50 dB what? You must specify relative to something.
I think the signal level from NLK in my area is about -50dbm.
I am unsure of the measurement, this is the value from the SV calibrated
> You will have to connect an analog signal source to the soundcard
I am not using a sound card, only the SDR-IQ.
> > I want to have the waterfall advance at some slow
> > rate that I do not know how to specify.
> You will easily find out once you have your soundcard running
> with an input signal. (There is an F1 help)
Is it possible to get a waterfall display with the SDR-IQ?
I have connected the SDR-IQ to my 12x12x36", 21 turn loop. I can see
several VLF stations in the FFT (is spectrum right word?) display. I
cannot see the waterfall display, it seems blank.
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en