[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: Linrad and MAP65-IQ Calibration

Actually, there is one little problem which showed up on further
The SDR-IQ only remembers the value of the amended sampling frequency
as long as it is still powered up.
If the computer (and therefore the SDR-IQ) is powered down, and then
restarted, the data is lost.
The SDR-IQ RAM seems to be volatile after all!
So you have to run SpectraVue every time you power up, just to load
the corrected sampling frequency.

This is possible, but a bit clumsy!
Leif, we seem to be back at the possibility of Linrad setting the SDR-
IQ correctly!

73  Guy  VK2KU
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en