[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Linrad] Re: Error: MAP65-IQ 4KHZ not MHZ


Set the centre frequency in Linrad to 144.126 (28.126) instead of 125.
You will find that the frequencies in the blue boxes of MAP65-IQ
are then correct - just a temporary fix until Joe fixes the bug.

My SDR-IQ is 300Hz out - wish I knew how to fix that, but I can live
with it!

73  Guy  VK2KU

On Mar 11, 3:43 pm, "nedstea...@xxxxxxxxxxxxxxx <nedstea...@xxxxxxxxx>
> Joe,
> There is a box in the lower left (until you move it) that lets you
> enter the center frequency of your hardware. Since I use the SDR-IQ on
> the 28 MHz IF of a DEMI transverter, I set the value to 28.125 ...
You received this message because you are subscribed to the Google Groups "Linrad" group.
To post to this group, send email to linrad@xxxxxxxxxxxxxxxx
To unsubscribe from this group, send email to linrad+unsubscribe@xxxxxxxxxxxxxxxx
For more options, visit this group at http://groups.google.com/group/linrad?hl=en