[linrad] Re: Using the Linrad Network

[Joe Taylor <Princeton.EDU; joe@xxxxxxxxxxxxxxxx>]

Leif and all,

It turns out that my network speed problem had a simple cause. 
The computer running Linrad is connected to the LAN through a 
rather old 10 Mbit/s hub/repeater.  Therefore it maxes out 
around 1.2 MByte/s, too slow for 4 channels at 96 kHz in any of 
Linrad's network modes except mode 4.

Looks like I need a new hub, or at least a simple crossover 
cable between the two computers.

I will report further, fairly soon I hope, on my effort to 
connect Linrad to MAP65.

	-- Joe, K1JT

#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>


LINRADDARNIL