[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

*Subject*: [linrad] Re: Linrad-02.00a*From*: "Rein A. Smit" <ix.netcom.com; rein0zn@xxxxxxxxxxxxxxxx>*Date*: Thu, 19 Jan 2006 11:03:20 -0800

Hello All,

machine 400 Mhz. It is saving the par files fine now.

SB16 Wav out.

why this message gets generated it does not happen in the linux versions ) Whether is it the 400 Mhz or not, but there is an instability

( no audio from rx supplied ) I will attach some of the parameter files this might help. 73 Rein W6/PA0ZN ------------------------------------------------------------------------ vga mode [0] font scale [1] mouse speed [0] input mode [4] rx channels [1] ad channels [1] ad speed [8000] ad device no [0] ad device mode [0] ad frag [0] da device no [0] min da speed [8000] max da speed [8000] max da channels [2] max da bytes [2] min da channels [1] min da bytes [1] da stop/start [0] memlock [0] check [2220200] Change only between brackets. If file has errors, Linrad will ignore file and prompt for a complete set of new parameters Linrad-02.00a ------------------------------------------------------------------------ ytop [0] ybottom [413] xleft [0] xright [303] yborder [206] xpoints per pixel [1] pixels per xpoint [1] first xpoint [0] xpoints [256] avg1num [5] spek avgnum [30] waterfall avgnum [30] check [6660024] yzero [2.250000000000000] yrange [3225.161376953125000] wat. db zero [0.000000000000000] wat. db gain [0.200000002980232] Change only between brackets. If file has errors, Linrad will ignore file and prompt for a complete set of new parameters Linrad-02.00a ------------------------------------------------------------------------ ytop [552] ybottom [740] xleft [432] xright [721] yborder [603] fft3 avgnum [50] pixels/point [1] coh factor [8] delay points [4] AGC flag [0] AGC attack [2] AGC release [4] Waterfall avgnum [5] AFC2 range [99] AFC2 delay [0] check [8880120] filter flat [144.531250000000000] filter curved [224.609375000000000] yzero [7.593750000000000] yrange [6144.000000000000000] dB/pixel [0.806053459644318] yfac pwr [0.000000000008505] yfac log [12.406125068664551] bandwidth [1.855468750000000] first freq [0.000000000000000] BFO freq [-6835.937500000000000] Output gain [0.185702264308929] Waterfall gain [1.000000000000000] Waterfall zero [20.000000000000000] Change only between brackets. If file has errors, Linrad will ignore file and prompt for a complete set of new parameters Linrad-02.00a ------------------------------------------------------------------------ ytop [674] ybottom [786] xleft [2] xright [58] Change only between brackets. If file has errors, Linrad will ignore file and prompt for a complete set of new parameters Linrad-02.00a ------------------------------------------------------------------------ ytop [601] ybottom [626] xleft [964] xright [1060] yborder [613] direction [1] gain [0] gain_inc [0] fq_inc [0.000000000000000000000000000000] freq [0.000000000000000000000000000000] Change only between brackets. If file has errors, Linrad will ignore file and prompt for a complete set of new parameters Linrad-02.00a ------------------------------------------------------------------------ ytop [414] ybottom [551] xleft [432] xright [721] mode (dumb) [1] mode (clever) [0] timf2 display [0] timf2 display lines [1] timf2 display hold [0] spek avgnum [1] limit (dumb) [500] limit (clever) [1000] check [7770050] factor (dumb) [5.000000000000000] factor (clever) [10.000000000000000] sellim fft1 S/N [30.000000000000000] sellim fft2 S/N [30.000000000000000] timf2 display gain wk [1.000000000000000] timf2 display gain st [1.000000000000000] Change only between brackets. If file has errors, Linrad will ignore file and prompt for a complete set of new parameters Linrad-02.00a ------------------------------------------------------------------------ First FFT bandwidth (Hz) [100] First FFT window (power of sin) [3] First forward FFT version [0] First FFT storage time (s) [4] First FFT amplitude [1000] Enable second FFT [1] First backward FFT version [0] Sellim maxlevel [6000] First backward FFT att. N [4] Second FFT bandwidth factor in powers of 2 [2] Second FFT window (power of sin) [1] Second forward FFT version [0] Second forward FFT att. N [7] Second FFT storage time (s) [20] Enable AFC/SPUR/DECODE [0] AFC lock range Hz [150] AFC max drift Hz/minute [100] Enable Morse decoding [0] Max no of spurs to cancel [0] Spur timeconstant (0.1sek) [5] First mixer bandwidth reduction in powers of 2 [4] First mixer no of channels [1] Baseband storage time (s) [200] Output delay margin (0.1sek) [5] Output sampling speed (Hz) [8000] Default output mode [1] Audio expander exponent [3] A/D speed [8000] Check [1110107] Change only between brackets. If file has errors, Linrad will ignore file and prompt for a complete set of new parameters Linrad-02.00a ------------------------------------------------------------------------ ****************************** fft1,fft2: 4.0 Megabytes(37 arrays) fft1_bytes 32768 ui.rx_channels=1 ui.ad_channels=1

fft1mode 2 bytes_per_fragment 2 timf1_blockbytes 212 fft1_blockbytes 2048 timf1_bytes 65536 fft1_bytes 32768 max_fft1_sumsq 127 fft1win (N) 3 fragment (N) 8 mix1_size 32 fft2_size 512 timf3_size 32768 timf3_sampling_speed 500.000000 hires: 0.1 Megabytes(4 arrays) fmt.nSamplesPerSec=8000 fmt.wBitsPerSample=16 fmt.nChannels=1fft3: 2.2 Megabytes(19 arrays) baseband: 8.2 Megabytes(19 arrays) baseband_sampling_speed=500.000000 fmt.nSamplesPerSec=8000 fmt.wBitsPerSample=16 fmt.nChannels=1 leif@xxxxxxxxxx wrote: ############################################################# This message is sent to you because you are subscribed to the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>. To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx> To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx> To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx> Send administrative queries to <linrad-request@xxxxxxxxxxxxxxxxxxxxx>LINRADDARNIL