[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[linrad] Re: R: [linrad] R: [linrad] Linrad-02.00




Hello Dennis,

It is at the bottom of this page:

  http://www.nitehawk.com/sm5bsz/linuxdsp/linroot.htm

73 Rein W6/PA0ZN


Dennis A. Homerick wrote:

Rein:
   I'm having trouble finding the link too download Linrad 2.0. Can you
help me out please.

Thanks

dennis Homerick

----- Original Message ----- From: "Rein A. Smit" <rein0zn@xxxxxxxxxxxxx>
To: "Linrad mailinglist" <linrad@xxxxxxxxxxxxxxxxxxxxx>
Sent: Monday, January 16, 2006 7:43 PM
Subject: [linrad] Re: R: [linrad] R: [linrad] Linrad-02.00


Hello All,

The following experiences with Linrad 2.0 the Win version so far

Assuming that the linrad file is a stand alone file ( Program )

I tried it on 2 machines:

Pentium 400 MHz, WinSE98 with sound blaster card ( this card will work
with DSPBlaster under DOS )
Pentium 2 GHz with Delta44 and AC97 . ( My double boot win/Linux machine )

The first time I loaded linrad
It asked for the graphics ( used "1",  seems to work fine )
Next it came up with available sound cards for input

0 FMTS  = fff  SB16 [220]
1  etc a few other devices

I select "0"

Q  Do you need other channels on this card?  A No

"Can not query under Windows"   Is this a statement or an error message?

Q  Sample freq  A = 8000    Q bits?  A = 16

Q select mode  A 1 normal audio   Error message : Stereo Device does not
accept mono!
Select 2  ( I/Q ) it does accept this choice.

Q select output device A = "0"  SB 16[220

Linrad appers to be working in I/Q mode -4 Khz to = 4 Khz

Have sound volume control is working and graphics are working
in mode B  ( normal CW )

It did not accept A ( weak CW  )  error 2004  , no error file present
could get out of the program with <ESC>

The only keys operating are B ( mode )  U and W


After a few excursions I find myself now in a situation that it does not
seem to accept the selections in "U"
and the program has stopped working.

The location is in C:/linrad and the param file is there as well

vga mode [0]
font scale [1]
mouse speed [0]
input mode [-1]
rx channels [0]
ad channels [0]
ad speed [0]
ad device no [0]
ad device mode [0]
ad frag [0]
da device no [0]
min da speed [0]
max da speed [0]
max da channels [0]
max da bytes [0]
min da channels [0]
min da bytes [0]
da stop/start [0]
memlock [0]
check [2220200]

Change only between brackets.
If file has errors, Linrad will ignore file and prompt
for a complete set of new parameters

Linrad-02.00

It appears that no parameters are saved at this point!


On the other machine I can't get sound cards selected ( either 2 * delta
or  delta and AC97 )

Also here I get the stereo/mono error messages.

73 Rein W6/PA0ZN




#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to
<linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to
<linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>




#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>




#############################################################
This message is sent to you because you are subscribed to
 the mailing list <linrad@xxxxxxxxxxxxxxxxxxxxx>.
To unsubscribe, E-mail to: <linrad-off@xxxxxxxxxxxxxxxxxxxxx>
To switch to the DIGEST mode, E-mail to <linrad-digest@xxxxxxxxxxxxxxxxxxxxx>
To switch to the INDEX mode, E-mail to <linrad-index@xxxxxxxxxxxxxxxxxxxxx>
Send administrative queries to  <linrad-request@xxxxxxxxxxxxxxxxxxxxx>

LINRADDARNIL