[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[linrad] Calibrating analog hardware

What have people found effective as a signal source when doing 
Linrad's procedure for calibration of analog hardware?  In 
particular, has a tuned amplifier for the RF (or IF) frequency in 
question been found necessary to get enough S/N?

I have used a pulse generator that produces pulses about 25 ns 
wide -- so they have significant power up to 40 MHz or so -- but 
at a PRF of order 100 Hz the S/N in the calibration procedure is 
			-- 73, Joe, K1JT